Description
Product details
Great value for money and guaranteed to outlast at least 10 years of everyday use. Read about the terms in the guarantee brochure.
The clean and simple expression is easy to combine with other furniture in the room.
The matte surface on the bathroom cabinet creates a sense of calm.
The drawers are protected from water damage thanks to a smart production technique. Foil is wrapped vertically around the particleboard so there are no unprotected edges where water can penetrate.
Cleaning the floor is a breeze since this solution is wall mounted and there are no legs that get in the way.
The smooth-running drawers with pull-out stop, open all the way for a good overview without falling out.
You can sense the calm every time you close the drawers thanks to the soft-closing mechanism. No worries about fingers getting trapped.
The deep bottom drawer has space for larger things like towels and hairdryer. The top drawer is suitable for smaller items like brushes, creams, sprays and accessories.
You can make good use of the space inside the drawers thanks to the smart design of the water trap that leads the piping into the far back of the cabinet.
The simple construction makes the drawers easy to assemble.
You save water and energy every time you lift the lever of the mixer tap thanks to the aerator device that prevents unnecessary use of water.
H Preutz/N Karlsson/IKEA of Sweden
Good to know
GODMORGON legs are sold separately.
Mixer tap and strainer are included.
Knobs included.
Two persons are needed for the assembly of this furniture.
Secure that the material in your bathroom walls can support the weight of the furniture. If you are uncertain about the installation, contact a professional.
The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
Materials & care
Material
- Side panel:
- Particleboard, Plastic foil (min. 90% recycled), Plastic edging, Plastic foil
- Front rail/ Back rail:
- Particleboard, Plastic foil, Plastic edging
- Drawer front:
- Particleboard, Plastic foil (min. 90% recycled), Plastic foil, Plastic edging
- Drawer sides/ Drawer back:
- Solid birch, Clear acrylic lacquer
- Drawer bottom:
- Particleboard, Melamine foil, Plastic edging
- Fibreboard, Plastic foil, High-pressure melamine laminate
- Water trap/ Washer:
- Polypropylene plastic
- Screw:
- Brass, Chrome-plated
- Strainer/ Stopper/ Knob:
- Stainless steel
- Seal:
- Synthetic rubber, Polyethylene foam
- Shaft:
- Acetal plastic
- Basematerial:
- Polyester/crushed marble, Polyester
- Body:
- Brass, Metallized
- Spout:
- Brass, Brass, Metallized
Care
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Laminate is sensitive to corrosive chemicals like descaling agents, chlorine or acetone. Remove immediately in case of spillage. Regular household detergents may be used.
Wipe dry with a clean cloth.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
Safety & compliance
The washbasin is resistant to most chemicals, except for strong acids and strong alkalis.This furniture must be fixed to the wall with the enclosed wall fastener.If you are uncertain about the strength of your bathroom walls we recommend that you use legs.
Sustainability & environment
By using a renewable material like wood in this product, we avoid using fossil or finite materials.
By using recycled plastic in this product, we consume less new raw materials and lower our environmental impact while existing materials get new life.
By using a renewable material like wood fibre in this product, we avoid using fossil or finite materials.
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
By creating all our taps and showers in a way that helps people use less water and energy, we contribute to enabling a more sustainable life at home.
Technical information
GODMORGON/TOLKEN / HÖRVIK
Wsh-stnd w countrtop 45x32 wsh-bsn
| Brand Name | IKEA |
| Type of tap | Wash basin mixer tap, tall |
| Max. static pressure | 10 bar (1,0MPa) (145.0 psi) |
| Max. hot water temperature | 80˚C (176˚F) |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Hose connection size | G 1/2" (R15) " |
| Max. countertop thickness | 50 mm (2") |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16") |
| Noise level | I |
| Strainer included | Yes |
| Third party certified according to local standards by | KIWA |
| UWLA QR code | www.uwla.eu |
| UWLA web address | www.uwla.eu |
| Min. working pressure | 0.2 bar (0,02MPa) (2.9 psi) |
| Recommended working pressure | 0.5 - 5 bar (0.05 - 0.5 MPa) (7.25 - 72.5 psi) |
| Connection hoses length | 400 mm (15 3/4") |
| UWLA technical icons | Cold Start |
| UWLA technical icons | Single Lever Mixer Taps |
Measurements
Depth: 49 cm
Height: 72 cm
Wash-stand width: 100 cm
Width: 102 cm
Package Detail:
Width: 50 cm
Height: 3 cm
Length: 114 cm
Weight: 7.79 kg
Package(s): 1
Width: 48 cm
Height: 8 cm
Length: 103 cm
Weight: 17.70 kg
Package(s): 1
Width: 35 cm
Height: 8 cm
Length: 103 cm
Weight: 14.26 kg
Package(s): 1
Width: 40 cm
Height: 19 cm
Length: 49 cm
Weight: 12.10 kg
Package(s): 1
Width: 23 cm
Height: 7 cm
Length: 41 cm
Weight: 2.21 kg
Package(s): 1
Trusted & Secure
