Description
Product details
You can store often-used things like cotton pads, brushes and hygiene products in the top drawer, and other things like towels the bottom drawer.
This base cabinet is 80 cm wide and perfect for sharing with others or for giving your own things the space they deserve.
Smooth, durable and easy-to-clean ceramic wash-basin with space for toothbrushes, soap dispenser and other smaller things on the wide back edge.
You save water and energy every time you lift the lever of the mixer tap thanks to the aerator device that prevents unnecessary use of water.
Cleaning the floor is a breeze since this combination is wall-mounted.
Oak effect ENHET fronts combine the warm feel of wood with the foil’s ability to withstand moisture, scratches and bumps.
The unique wedge dowels make assembly easy and the fittings are nearly invisible.
10 year guarantee. Read about the terms in the guarantee brochure.
H Preutz/A Fredriksson/Hanna-Kaarina Heikkilä/IKEA of Sweden
Good to know
Comprises: 1 base cabinet for wash-basin, 2 drawer fronts, 1 wash-basin, 1 mixer tap, 1 water trap and strainer and 2 handles.
Mixer tap and strainer are included.
Handles included.
Secure that the material in your bathroom walls can support the weight of the furniture. If you are uncertain about the installation, contact a professional.
Two persons are needed for the assembly of this furniture.
Ceramic wash-basins are kiln-fired, which makes each one unique and the size may vary slightly from the measurements given.
Water-trap is included.
The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
Materials & care
Material
- Side panel:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging
- Bottom panel/ Back rail:
- Particleboard, Plastic foil
- Drawer:
- Steel, Epoxy/polyester powder coating
- Drawer bottom:
- Fibreboard, Plastic foil
- Ceramics, Coloured glaze
- Aluminium, Epoxy/polyester powder coating
- Basematerial:
- Particleboard
- Front side/ Backside:
- Plastic foil
- Edge:
- Plastic edging
- Body:
- Brass, Metallized
- Spout:
- Brass, Brass, Metallized
- Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
- Polypropylene plastic
- Sealing ring/ Gasket/ Seal:
- Synthetic rubber
- Waste pipe:
- Polypropylene plastic, Synthetic rubber
- Strainer:
- Stainless steel
- Seals:
- Polyethylene foam
- Assembly tool:
- ABS plastic
Care
Wipe clean with a mild soapy solution.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Wipe dry with a clean cloth.
Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Wipe dry with a clean cloth.
Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
Safety & compliance
This furniture must be fixed to the wall with the enclosed wall fastener.If you are uncertain about the strength of your bathroom walls we recommend that you use legs.
Sustainability & environment
basecb f washbasin w 2 drawers
By using fibreboard with a particle board frame and honeycomb paper as filling material in this product, we use less wood per product. That way, we take better care of resources.
By using recycled paper in this product, we consume less new raw materials and lower our environmental impact while existing materials get new life.
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
By using sawmill leftovers and scrap wood in the particle board in this product, we make use of whole trees and not only the trunks. That way, we take better care of resources.
By creating all our taps and showers in a way that helps people use less water and energy, we contribute to enabling a more sustainable life at home.
Technical information
ENHET / TVÄLLEN
Wash-stand with 2 drawers
| Brand Name | IKEA |
| Min. working pressure | 0.2 bar (0,02MPa) (2.9 psi) |
| Recommended working pressure | 0.5 - 5 bar (0.05 - 0.5 MPa) (7.25 - 72.5 psi) |
| Max. static pressure | 10 bar (1,0MPa) (145.0 psi) |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16") |
| Connection hoses length | 450 mm (17 3/4") |
| Max. countertop thickness | 50 mm (2") |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Max. hot water temperature | 80˚C (176˚F) |
| Hose connection size | G 1/2" (R15) " |
| Noise level | I |
| Third party certified according to local standards by | KIWA |
| Type of tap | Wash-basin mixer tap |
| Strainer included | Yes |
| UWLA QR code | www.uwla.eu |
| UWLA web address | www.uwla.eu |
| UWLA technical icons | Cold Start |
| UWLA technical icons | Single Lever Mixer Taps |
| Max. flow rate at 3 bar | 5.7 l/min |
Measurements
Width: 84 cm
Wash-stand width: 80 cm
Depth: 43 cm
Height: 65 cm
Package include:
Width: 21 cm
Height: 7 cm
Length: 35 cm
Weight: 1.21 kg
Package(s): 1
Width: 48 cm
Height: 20 cm
Length: 88 cm
Weight: 22.15 kg
Package(s): 1
Width: 41 cm
Height: 12 cm
Length: 86 cm
Weight: 15.45 kg
Package(s): 1
Width: 31 cm
Height: 8 cm
Length: 45 cm
Weight: 0.49 kg
Package(s): 1
Width: 12 cm
Height: 2 cm
Length: 24 cm
Weight: 0.08 kg
Package(s): 1
Width: 31 cm
Height: 4 cm
Length: 86 cm
Weight: 5.80 kg
Package(s): 1
Trusted & Secure
