Description
Product details
Great value for money and guaranteed to outlast at least 10 years of everyday use. Read about the terms in the guarantee brochure.
The clean and simple expression is easy to combine with other furniture in the room.
Smooth, durable and easy-to-clean ceramic wash-basin with space for toothbrushes, soap dispenser and other smaller things on the wide edges.
The drawers are protected from water damage thanks to a smart production technique. Foil is wrapped vertically around the particleboard so there are no unprotected edges where water can penetrate.
The smooth-running drawers with pull-out stop, open all the way for a good overview without falling out.
You can sense the calm every time you close the drawers thanks to the soft-closing mechanism. No worries about fingers getting trapped.
You can make good use of the space inside the drawers thanks to the smart design of the water trap that leads the piping into the far back of the cabinet.
The simple construction makes the drawers easy to assemble.
You save water and energy every time you lift the lever of the mixer tap thanks to the aerator device that prevents unnecessary use of water.
IKEA of Sweden/Magnus Elebäck
Good to know
GODMORGON legs are sold separately.
Strainer and water-trap are included.
Secure that the material in your bathroom walls can support the weight of the furniture. If you are uncertain about the installation, contact a professional.
Two persons are needed for the assembly of this furniture.
Please note that the wash-basin may be up to 2 cm wider than the wash-stand to protect it from water leakage.
The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
Materials & care
Material
- Frame/ Back rail:
- Particleboard, Plastic foil, Plastic edging
- Drawer front:
- Particleboard, Plastic foil, Plastic foil, Plastic edging
- Drawer sides/ Drawer back:
- Solid birch, Clear acrylic lacquer
- Drawer bottom:
- Particleboard, Melamine foil, Plastic edging
- Basematerial:
- Ceramics, Coloured glaze
- Water trap/ Washer:
- Polypropylene plastic
- Screw:
- Brass, Chrome-plated
- Strainer/ Stopper/ Knob:
- Stainless steel
- Seal:
- Synthetic rubber, Polyethylene foam
- Shaft:
- Acetal plastic
- Body:
- Brass, Metallized
- Spout:
- Brass, Brass, Metallized
Care
Wipe dry with a clean cloth.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
Safety & compliance
This furniture must be fixed to the wall with the enclosed wall fastener.The washbasin should not come in contact with ammonia, acids, strong detergents, hair dye or chlorine.If you are uncertain about the strength of your bathroom walls we recommend that you use legs.
Sustainability & environment
By using a renewable material like wood in this product, we avoid using fossil or finite materials.
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
By creating all our taps and showers in a way that helps people use less water and energy, we contribute to enabling a more sustainable life at home.
Technical information
GODMORGON / ODENSVIK
Wash-stand with 2 drawers
| Brand Name | IKEA |
| Type of tap | Wash-basin mixer tap |
| Max. static pressure | 10 bar (1,0MPa) (145.0 psi) |
| Max. hot water temperature | 80˚C (176˚F) |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Hose connection size | G 1/2" (R15) " |
| Max. countertop thickness | 50 mm (2") |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16") |
| Noise level | I |
| Strainer included | Yes |
| Third party certified according to local standards by | KIWA |
| UWLA QR code | www.uwla.eu |
| UWLA web address | www.uwla.eu |
| Min. working pressure | 0.2 bar (0,02MPa) (2.9 psi) |
| Recommended working pressure | 0.5 - 5 bar (0.05 - 0.5 MPa) (7.25 - 72.5 psi) |
| Connection hoses length | 500 mm (19 3/4") |
| UWLA technical icons | Cold Start |
| UWLA technical icons | Single Lever Mixer Taps |
| Max. flow rate at 3 bar | 5.7 l/min |
Measurements
Width: 103 cm
Wash-stand width: 60 cm
Depth: 49 cm
Height: 64 cm
Product detail:
Width: 55 cm
Height: 19 cm
Length: 107 cm
Weight: 29.00 kg
Package(s): 1
Width: 23 cm
Height: 7 cm
Length: 34 cm
Weight: 1.59 kg
Package(s): 2
Width: 47 cm
Height: 8 cm
Length: 102 cm
Weight: 16.84 kg
Package(s): 1
Width: 35 cm
Height: 8 cm
Length: 102 cm
Weight: 14.30 kg
Package(s): 1
Trusted & Secure
